RANCANG BANGUNMESIN PENCACAH KERTAS KAPASITAS 50 KG/JAM
Keywords:
Paper, enumerator, VDI 2222Abstract
Paper is a material that is often used as a medium for writing, painting, making documents and others. Because it is easy to find, paper is one of the most important materials in various fields such as industry, offices and others. Many paper shredding machines have been produced, but they can only chop paper with a small capacity. The aim of this final project is to design and manufacture a paper chopping machine that is capable of chopping paper with a capacity of 50 kg/hour with a chopped output of ± 2 cm in an effort to increase work efficiency and productivity. The design method used in the final project of this paper chopping machine is the VDI 2222 method (Verein Deutcher Ingenieure / German Engineers Association). Based on the design and trial results, the paper shredding machine uses an electric motor, a pulley and v-belt transmission system, and 8 circular saw blades, and from the trial results, this machine can shred paper with a capacity of 50 kg in 34.7 minutes with a chopped yield of ± 2 cm. The conclusion obtained is that the paper chopping machine that is made can chop paper in accordance with existing demands.
Downloads
References
Alfadhlani dan Isa Setiasyah Toha, (2008), "Penentuan Urutan Perakitan Produk Multiaksial Ortogonal dengan Mempertimbangkan Titik Lokasi Mating dan Volume Komponen", Jurnal Teknik Industri, vol.10, no.2, pp. 124-137.
Awali dan Asroni, (2013), "Analisa Kegagalan Poros dengan Pendekatan Metode Elemen Hingga.", Jurnal Program Studi Teknik Mesin, vol.2, no.2.
Corinthias P. M. Sianipar dkk., (2013), "Design Methodology for Appropriate Technology: Engineering as if People Mattered", vol.5, pp. 3382-3425.
Eko Luqman Armansyah, (2020), "Analisis Motor Listrik General Service Pump yang Terbakar di MV KT 06", Skripsi, Politeknik Ilmu Pelayaran Semarang, Semarang.
Erlian Supriyanto, (2011), "Penentuan Interval Waktu Perawatan Forklift Scaglia Berdasarkan Data Laju Kerusakan Mesin di PT. "X"". Jurnal Industri Elektro dan Penerbangan, vol.1, no.3.
Faisal Lubis dkk., (2021), "Analisa Kekuatan Bearing Pada Prototype Belt Conveyor, Jurnal Mesil (Mesin, Elektro, Sipil)", vol.2, no.2, pp. 51-57.
Hyprowira, (2020), Kiat Perawatan dan Pemeliharan Mesin Industri, diakses pada 21 Mei 2023, <https://hyprowira.com/blog/perawatan-dan-pemeliharaan-mesin-industri>.
I Nyoman Bagia dan I Made Parsa, (2018), Motor-Motor Listrik., CV. Rasi Terbit.
Imam Arifin, (2013), Komponen-Komponen Mesin, diakses pada 10 Mei 2023, <http://sumberautomotive.blogspot.com/2014/02/komponen-mesin.html>.
Kementerian Lingkungan Hidup (KLHK), (2020), Sampah Kertas di Indonesia, diakses pada 5 Mei 2023, <https://www.google.com/search?q=data+sampah+kertas+menurut+klhk&sxsrf=AB5stBipc-1-yjsDdL4HhJJ8Qv3Ll78mSA%3A1689082592905&ei=4FqtZMKkNrOUseMP3v-fGA&ved=0ahUKEwjClMj_4oaAAxUzSmwGHd7_BwMQ4dUDCA4&uact=5&oq=data+sampah+kertas+menurut+klhk&gs_lcp=Cgxnd3Mtd2l6LX>.
Muhammad Arsyad dan Ahmad Zubair Sultan, (2018), Manajemen Perawatan, Deepublish, Yogyakarta.
Risky Abadi, (2023), Motor DC : Pengertian, Fungsi, Prinsip Kerja, Jenis Bagian, diakses pada 20 Mei 2023, <https://thecityfoundry.com/motor-dc/>.
Sularso dan Kiyokatsu Suga (2004), Dasar Perencanaan dan Pemilihan Elemen Mesin, PT. Pradnya Paramita, Jakarta.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Hary Dwi Rama, Idfi Berliansyah, Dandi Saputra Pratama, Erwanto Erwanto, Amril Reza
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
