ANALISA UJI KEKUATAN MATERIAL TROLI PADA SEPEDA BERBAHAN BAJA KARBON RENDAH

Authors

  • Rama Irdyan Rama Irdyan Politeknik Negeri Bangka Belitung
  • Subkhan Subkhan
  • Rodika Rodika

Keywords:

Kata kunci : Troli, Baja St37, Software Solidwork.

Abstract

Trolley is a means of moving from one area to another. A very helpful manual tool for moving goods, in order to facilitate the movement of an item to the destination. However, these activities will be hampered if the luggage is a lot and heavy. So the trolley will be made slightly different from the general trolley, namely in the form of a trolley that can be paired as a bicycle holder. This tool has a main frame that can be called for a load, the frame itself uses low carbon steel material in the form of a hollow box, namely St37 steel with a length of 188 mm, width 15x15 mm and thickness of 1.3 mm. In this study, to complete the analysis of frame strength using Solidworks Software, using a static simulation feature so that the stress value that occurs can be known. Solidworks is able to improve and validate performance and reduce the need for prototypes or costly design changes at a later date. The results of this study indicate that the trolley using low carbon steel material with a predetermined size is able to withstand the load of 30 kg.

Downloads

Download data is not yet available.

References

Aggen, G., Frank W. Akstens, C. Michael Allen, P. Babu, Alan M. Bayer, Felix Bello, M. Blair, Bruce Boardman, and Kurt W. Boehm. 2005. ASM HANDBOOK, Volume 1, Properties and Selection : Irons , Steels , and High Performance Alloys Section : Publication Information And Contributors Publication Information And Contributors. Vol. 1.

A. Fathan, “Desain Urban Folding Bike 2020 dengan Konsep Dinamis Efektif dan Compact,” 2019.

Bhakti, D., Haryadi, G., & Umardani, Y. (2013). ANALISIS STRUKTUR MIKRO DAN SIFAT MEKANIS HASIL LAS TITIK DAN BRAZING UNTUK INDUSTRI RUMAHAN. JurnalTeknik Mesin S-1, 1-8.

Djuhana, Yulianto, D. A., & Mulyadi. (2020). Plate Mold dengan Software Simulasi (Solidworks 3D). Journal of Technical Engineering: Piston, 6-16.

Driyantama, S. (2018). PEMBUATAN TROLLEY LIPAT SEBAGAI ALAT BANTU ANGKUT. 1-78.

Hamid, A. (2016). ANALISA PENGARUH ARUS PENGELASAN SMAW PADA MATERIAL BAJA KARBON RENDAH TERHADAP KEKUATAN MATERIAL HASIL SAMBUNGAN. Jurnal Teknologi Elektro, Universitas Mercu Buana, 7(1), 26-36.

Downloads

Published

02-08-2021

How to Cite

Rama Irdyan, R. I., Subkhan, S., & Rodika, R. (2021). ANALISA UJI KEKUATAN MATERIAL TROLI PADA SEPEDA BERBAHAN BAJA KARBON RENDAH. Prosiding Seminar Nasional Inovasi Teknologi Terapan, 1(01), 87–92. Retrieved from http://snitt.polman-babel.ac.id/index.php/snitt/article/view/91

Most read articles by the same author(s)

1 2 > >>