PENGARUH VARIASI PARAMETER PENGELASAN TERHADAP KEKUATAN SAMBUNGAN HASIL FRICTION WELDING PADA BAJA ST.41

Authors

  • Picki Ilham Student
  • Rodika Rodika
  • Somawardi Somawardi

Keywords:

friction welding, rpm variation, low carbon steel, impact

Abstract

Friction welding is a type of welding that connects two materials with the heat generated by the material itself so that it does not require additional materials. Heat can occur due to the presence of two objects rubbing against each other so that the material can melt and there is a connection due to forging process. The purpose of this study was to determine the impact strength of friction welding joints. The material used in this research is low carbon steel St.41 in the form of of a solid cylinder which has a diameter of 13mm. From the research that has been done, it is found that friction welding using 720 and 1000 rpm have better joint strength than using 450 rpm, which means that specimens with 720 and 1000 rpm have a higher amount of energy absorbed and impact values than specimens using 450 rpm.

Downloads

Download data is not yet available.

References

Husodo, Nur, et al. Penerapan Teknologi Las Gesek (Friction Welding) Dalam Rangka Penyambungan Dua Buah Logam Baja Karbon St41 Pada Produk Back Spring Pin. Jurnal Energy dan Manufaktur 6.1. 2013: 1-94.

Kalpakijan, Serope and Schmid, R Stephen. Manufacturing Processes for Engineering Materials - Fourth Edition. s.l. : Prentice Hall, 2003.

Purnomo, Sigit. Pengaruh Variasi Putaran Gesek Terhadap Kualitas Sambungan Pada Pengelasan Gesek Continous Friction Welding Bahan Pipa Kuningan dan Tembaga. 2016

Setyawan. Pengaruh Proses Perlakuan Panas Terhadap Penggunaan Media Pendingin Terhadap Kekuatan Tarik Material St.41. Kediri : Universitas Negeri PGRI Kediri, 2018

Tiwan, .Aan Ardian. PENYAMBUNGAN BAJA AISI 1040 BATANG. Bandung : Politeknik Manufaktur Negeri Bandung, 2005, pp. 1-4.

Downloads

Published

22-02-2022

How to Cite

Ilham, P., Rodika, R., & Somawardi, S. (2022). PENGARUH VARIASI PARAMETER PENGELASAN TERHADAP KEKUATAN SAMBUNGAN HASIL FRICTION WELDING PADA BAJA ST.41. Prosiding Seminar Nasional Inovasi Teknologi Terapan, 2(01), 451–456. Retrieved from https://snitt.polman-babel.ac.id/index.php/snitt/article/view/190

Most read articles by the same author(s)

1 2 > >>