RANCANG BANGUN MESIN PENGUPAS KULIT LUAR BIJI KOPI (PULPER)

Authors

  • Reynaldi Anggara
  • Muhammad Salman Alfarisi
  • Indah Cahya Dinata Politeknik Manufaktur Negeri Bangka Belitung
  • Masdani Masdani
  • Muhammad Haritsah Amrullah

Keywords:

coffee, coffee fruit, peeler machine

Abstract

Indonesia is one of the coffee producing countries in the world. Coffee in Indonesia has characteristics and a delicious aroma and tends to be bitter. Coffee plants in Indonesia grow at an altitude of 400-700 above sea level with a temperature of 24-30ºC. The problem raised in this research is how to design and build a coffee bean pulper machine so that the coffee beans can be peeled from the skin. With a target capacity of 8 kg/hour and the percentage of the coffee outer skin that is peeled 70. Based on the trial results of 3 times on the coffee bean peeling machine, the following results were obtained. In the first process of peeling the coffee skin with a time of 1 minute 30 seconds in 1 process it consumes 400 grams. In the 2nd trial results, within 3 minutes it produced 870 grams. And the results of the third trial with a time of 12 minutes produced 3600 grams. Based on the results of the design and manufacture of a coffee bean peeler machine using the VDI 2222 method and using the Inventor 2020 software, it produces a machine design that functions properly. This machine is able to peel coffee beans from the skin in 12 minutes to get a yield of 3600 grams, using an electric motor ¼ HP.

Downloads

Download data is not yet available.

References

Akbar, F. B., Yusuf, A., Thoriq, A., & Sugandi, W. K. (2020). Analisis Teknik dan Uji Kinerja Mesin Pengolah Kopi (Pulper dan Huller) Mobile pada Alat Mekanis Multiguna Pedesaan (AMMDes) Pengolahan Kopi (Studi Kasus di PT Kreasi Mandiri Wintor Indonesia, Kab. Bogor, Jawa Barat)",.

Budiman. (2012). Mekanisme Pengupasan Pada Mesin Pulper Dengan Penggerak Motor Listrik. Jurnal Teknik Mesin Fakultas Teknik Universitas Halu Oleo Kendari.

Budiyanto, E., Yuono, L. D., & Farindra, A. (2019). Upaya Peningkatan Kualitas dan Kapasitas Produksi Mesin Pengupas Kulit Kopi Kering. Jurnal Program Studi Teknik Mesin.

Iqbal, I., Mahendra Dwi, C. S., & Sisylennia Feby, O. (2022). MESIN PENCETAK LAKSA SISTIM VERTIKAL (Doctoral dissertation, Politeknik Manufaktur Negeri Bangka Belitung.

Kelik, V., Hengky, & Kurniawan, D. (2016). Perancangan Mesin Pengupas Dan Pemisah Kulit Buah Kopi Kering. Jurusan Teknik Mesin Fakultas Teknik Universitas Mercu Buana, 64-70.

Nasution, Y. A., & Rike, E. (2018). Perancangan Alat Pengupas Kulit Kopi Kapasitas 120kg/jam. Universitas Muhammadiyah Jakarta, 140-145.

Rahmad, N., & Sakti, M. A. (n.d.). Rancang Bangun Mesin Pengupas Kulit Kopi. Jurnal Teknik Mesin Fakultas Teknik Mesin Universitas Negeri Surabaya.

Sularso, & Kiyokatsu, S. (2013). Dasar Perencanaan Dan Pemeliharaan Elemen Mesin. Jakarta: PT Pradnya Paramita.

Downloads

Published

20-07-2023

How to Cite

Anggara, R. ., Salman Alfarisi, M., Cahya Dinata, I. ., Masdani, M., & Haritsah Amrullah, M. . (2023). RANCANG BANGUN MESIN PENGUPAS KULIT LUAR BIJI KOPI (PULPER). Prosiding Seminar Nasional Inovasi Teknologi Terapan, 3(01), 270–273. Retrieved from https://snitt.polman-babel.ac.id/index.php/snitt/article/view/470

Most read articles by the same author(s)

1 2 > >>