ANALISIS NILAI KEKASARAN PERMUKAAN PROSES CNC MILLING BAJA AISI 1045 METODE RESPON SURFACE
Keywords:
AISI 1045, Surface Roughness, Respon SurfaceAbstract
Minimum surface roughness is the desired goal in the MORI SEIKI MV-40M CNC machining process with the right machining process parameters in order to obtain a minimum workpiece surface roughness response. The results of the study indicate that to reduce the variation of the response simultaneously. To obtain minimum workpiece surface roughness on AISI 1045 steel with a variation of 0.18 mm infeed depth parameter (factor A level 1), feed rate 60 mm/min (factor B level 1 and spindle rotation 800 RPM (factor C level 2) with a The resulting roughness is 1,169 m.
Downloads
References
Apreza, Said, Zaldy Kurniawan, dan Muhammad Subhan. 2017. “Optimasi Kekasaran Permukaan Proses Pembubutan Baja ST. 42 dengan menggunakan Metode Taguchi.” Jurnal Manutech 9: 74-85.
Kurniawan, Z. 2013. "Optimasi Laju Pengerjaan Material Dan Kekasaran Permukaan Proses EDM Sinking Baja AISI 4140 Dengan Menggunakan Metode Taguchi-Fuzzy."
Kurniawan, Zaldy, Eko Yudho, dan Ridho Rosmansyah. 2018. “Optimasi Kekasaran Permukaan pada Material Amutit dengan Proses CNC Turning menggunakan Desain Taguchi.” Jurnal Manutech 10: 46-57.
Pratama, M Y. 2017. "Analisis Parameter Pemotongan Dan Debit Pendingin CNC Milling Terhadap Kekasaran Permukaan Menggunakan Box Behnken Design."
Raul, Widiyanti, dan Poppy. 2016. “Pengaruh Variasi Kecepatan Potong dan Kedalaman Potong pada Mesin Bubut terhadap Tingkat Kekasaran Permukaan Benda Kerja ST 41.” Jurnal Teknik Mesin.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Egi Endrian, Muhammad Subhan, Yuliyanto Yuliyanto
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
