PENGARUH VARIASI LAPISAN (1-3) ANYAMAN SERAT TERHADAP KEKUATAN TARIK DAN IMPAK KOMPOSIT RESIN BERPENGUAT SERAT RESAM

Authors

  • arbi syahrian Politeknik Manufaktur Negeri Bangka Belitung
  • Juanda Juanda
  • Zulfitriyanto Zulfitriyanto

Keywords:

impact strength, tensile strength, resam woven fiber, composite material

Abstract

Resam (Dicranopteris linearis syn. Gleichenia linearis) can be used as an alternative raw material. This material is easy to obtain because it can be used in almost all corners of Indonesia, especially the Bangka Belitung area, is easy to process, and has a size of stem content and stem size. Has good mechanical properties, corrosion resistance, easy to obtain from nature and environmentally friendly raw materials. So it can be developed as a composite material. This study aims to determine the effect of variations in layers (1-3) of woven fibers on the tensile strength and impact of resin-reinforced composites. In this study, using variations in the number of different layers, namely 1 layer, 2 layer, and 3 layer. The material used is resam woven fiber resin. Tensile test specimens were made with reference to the ASTM D-638 standard and impact testing according to ISO-179. The research results show,. The highest tensile strength value is found in the 1-layer layer, which is 26.4 MPa and the highest impact strength is owned by the 3-layer composite, which is 0.09014 J/mm2. Based on the results of the comparison test, the number of fiber layers greatly affects the tensile and impact strength.

Downloads

Download data is not yet available.

References

Rusman Nur Ichsan and Moch. Arif Irfa’i, "PENGARUH SUSUNAN LAMINA KOMPOSIT BERPENGUAT SERAT E-GLASS DAN SERAT CARBON TERHADAP KEKUATAN TARIK DENGAN MATRIK POLYESTER," Pengaruh Susunan Lamina Komposit Berpenguat Serat E-Glass dan Serat Carbon, vol. Volume 03, pp. 32-39, 2015.

Hendri Hestiawan and Asrul Fauzi, "Studi Pengaruh Fraksi Volume dan Susunan Serat Terhadap Kekuatan Tarik dan Bending Komposit Resin Berpenguat Serat Rotan (Calamus Trachycoleus)," Jurnal Mechanical, vol. 5, p. 4, maret 2014.

Susi Hartanto, Rosaline , and Aloysius Baskoro, "PEMANFAATAN SERAT ALAMI RESAM DALAM," Dimensi, vol. Vol.12- no.2, pp. 147-160, september 2015.

Herwandi and Robert Napitupulu, "PENINGKATAN KUALITAS SERAT RESAM UNTUK BAHAN PEMBUATAN KOMPONEN KENDARAAN BERMOTOR," Seminar Nasional Sains dan Teknologi 2015, November 2015.

F. L MATHEW and R.D.RAWLINGS., "Composite materials: Engineering and science," Chapman&Hall, june 1994.

Downloads

Published

22-02-2022

How to Cite

syahrian, arbi, Juanda, J., & Zulfitriyanto, Z. (2022). PENGARUH VARIASI LAPISAN (1-3) ANYAMAN SERAT TERHADAP KEKUATAN TARIK DAN IMPAK KOMPOSIT RESIN BERPENGUAT SERAT RESAM . Prosiding Seminar Nasional Inovasi Teknologi Terapan, 2(01), 457–463. Retrieved from https://snitt.polman-babel.ac.id/index.php/snitt/article/view/152

Most read articles by the same author(s)