OPTIMASI PARAMETER PROSES 3D PRINTING TERHADAP KEKUATAN TARIK FILAMENT POLYETHYLENE TEREPHTHALET GLYCOL

Authors

  • Rovi Avriansah Politeknik Manufaktur Negeri Bangka Belitung
  • Pristiansyah Pristiansyah
  • Erwanto Erwanto

Keywords:

3D Printing, FDM, Uji Tarik

Abstract

3D printing technology is the latest technology in the field of Additive layer manufacturing (AM). One of the AM that is currently being developed is Rapid Prototyping (RP) based on FDM, the FDM type uses polymer melted by heating then extruded through a nozzle as ink and deposited on the printer table to produce 3D objects layer by layer (layer by layer). In this research, the filament used is PETG (Polyethylene terephthalate Glycol) filament. In this study, the taguchi L9 () OA method was used. This study aims to determine the effect of the process parameters used in tensile testing in accordance with the process parameters used, namely Nozzel Temperature, Bed Temperature, Wall Thicknes, and Infill Speed. The results showed that the parameters that greatly influenced the tensile test using PETG filament were Bed Temperature (70°C), Nozzle Temperature (230°C), Wall Thickness (0.8 mm), and Infill Speed ​​(40 mm/s).

Downloads

Download data is not yet available.

References

Ade Ferdiansyah, P. B. (2021). Optimasi Prameter Proses 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE Menggunakan Metode Taguchi L9. Seminar Nasional Inovasi Teknologi Terapan.

Ardiyanto, D. (2021). Uji Pengaruh Kecepatan dan Perbedaan Suhu Antara Filament PLA dengan Filament PETG Pada 3D Printer Ender 5 Pro. 4.

Aris Widyo Nugroho, D. T., & Budiyantoro, C. (2020). Analisis Pengaruh Parameter Proses Terhadap Kuat tarik Produk 3D Printing dari Bahan Polyvinyl Alcohol (PVA). Jurnal Program Studi Teknik Mesin UM Metro, Turbo Vol. 9 No. 2. 2020.

Deni Andriansyah, H., & Purfaji. (2018). Optimasi proses 3D Printing Terhadap Kuat Tarik Filamen Polylactic Acid Menggunakan Metode Taguchi. Seminar Nasional Pendidikan Teknik Otomotif Fakultas Keguruan dan Ilmu Pendidikan - universitas muhammadiyah Purworejo, 66-67.

Eduar Iqbal Riza, C. B., & Nugroho, A. W. (2020). Peningkatan Kekuatan Lentur Produk 3D Printing material PETG Dengan Optimasi Parameter Proses menggunakan Metode TAGUCHI. Media Mesin: Majalah Teknik Mesin, 66-75.

Grabowik, K., & Cwikla, P. K. (2017). Tensile test of specimens made of selected group of the filament materials manufactured with FDM methode. MATEC Web of Conferences, 112, 1-6.

Muhammad Habib Bari, P., & Aswin, F. (2021). Optimasi Parameter Proses 3D Printing Terhadap Kekuatan Tarik Filamen PLA Food Grade. Seminar Nasional Inovasi Teknologi Terapan.

Pristiansyah, H., & Sugiyarto. (2019). Optimasi Parameter Proses 3D Printing FDM Terhadap Akurasi Dimensi Menggunakan Filamen Eflex. Manutech: Jurnal Teknologi Manufaktur.

Downloads

Published

22-02-2022

How to Cite

Avriansah, R., Pristiansyah, P., & Erwanto, E. (2022). OPTIMASI PARAMETER PROSES 3D PRINTING TERHADAP KEKUATAN TARIK FILAMENT POLYETHYLENE TEREPHTHALET GLYCOL. Prosiding Seminar Nasional Inovasi Teknologi Terapan, 2(01), 394–400. Retrieved from https://snitt.polman-babel.ac.id/index.php/snitt/article/view/199

Issue

Vol. 2 No. 01 (2022): Prosiding Seminar Nasional Inovasi Teknologi Terapan

Section

Articles

License

Copyright (c) 2022 Rovi Avriansah, Pristiansyah Pristiansyah, Erwanto Erwanto

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)

1 2 3 > >>