ANALISIS KEKUATAN IMPAK PADA MATERIAL KOMPOSIT BERPENGUAT LIMBAH FILTER ROKOK SEBAGAI BAHAN DASAR PEMBUATAN CANGKANG HELM
Keywords:
Helmet, impact strength, cigarette filter waste, composite materialAbstract
Cigarette filter waste is one of the wastes that is difficult to recycle and has no selling value, so cigarette filter waste is used as an alternative material for making helmet shells. This study aims to determine how a composite material (ie 16% HGM, 76.5% epoxy, 7.5% cigarette filter waste) is used as a basic material in the manufacture of helmet shells. The testing process carried out is the charpy impact test with different specimen thicknesses (3 mm, 4 mm, 5 mm). Based on this study with a thickness of 3 mm, the highest average impact strength compared to other thickness specimens was 0.02868 J/mm2, at 4 mm thickness was 0.01628 J/mm2, at 5 mm thickness was 0.01025 J/mm2 .. In this test, compared with the results of the SNI helmet impact strength test of 0.00972 J/mm2 then all specimens passed the material test for SNI helmets.
Downloads
References
Aji, A., Maulinda, L. & Amin, S., 2015. Isolasi Nikotin dari Puntung Rokok Sebagai Insektisida. Jurnal Teknologi Kimia Unimal, pp. 100-120.
Candra, A. I., Gardjito, E., Cahyo, Y. & Prasetyo, G. A., 2019. Pemanfaatan Limbah Puntung Rokok Filter Sebagai Bahan Campuran Beton Ringan Berpori.
M. Gokulnath, P. H. K. S. J. J. J. C. N. A. P., 2019. UTILISATION OF CIGARETTE BUTTS IN CLAY BRICKS. International Research Journal of Engineering and Technology (IRJET) , p. 3240.
Mukhamad, A. F. H. & Setyoko, B., 2014. Studi Kelayakan Mekanik Komposit Serat Rami Acak-Polyester Sebagai Bahan Helm Standar SNI.
Mulyo, B. T. & Yudiono, H., 2018. Analisis Kekuatan Impak Pada Komposit Serat Daun Nanas Untuk Bahan Dasar Pembuatan Helm SNI. Jurnal Kompetensi Teknik, p. 2.
Rahman, M. T. & Giustozzi, A. M. F., 2020. Possible Recycling of Cigarette Butts as Fiber Modifier in Bitumen for Asphalt Concrete. p. 1.
Rollastin, B., 2018. Uji Penetrasi Spesimen Pada Sungkup Helm Berbahan Biokomposit Sebagai Bahan Alternatif Pengganti Helm. Jurnal Manutech, Volume 10, p. 9.
Safa'at, A., 2017. Aplikasi Komposit Epoxy – HGM – Carbon Fiber Pada Sungkup Helm Untuk Menahan Penetrasi dan Mereduksi Energi Impact, Surabaya: Repository Institut Teknologi Sepuluh Nopember.
Suryana, D., Junaidi, A. & Rizki, M., 2018. Pengaruh Komposisi Komposit Serat-Serat Eceng Gondok. Jurnal Austenit, p. 56.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Diah Mayleni, Boy Rollastin, Masdani Masdani
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
