PENGARUH CHAMBER PADA MESIN 3D PRINTING FDM TEHADAP HASIL PRODUK DENGAN MENGGUNAKAN FILAMEN ABS
Keywords:
FDM, chamber, ABS, accuracy, dimensionalAbstract
3D printing technology using the Fused Deposition Modeling (FDM) system is one of the manufacturing processes currently being developed. The rapid prototyping process makes it easier for academics in research. Acrylonitrile Butadiene Styrene (ABS) filament material is the type of material used in this research. The purpose of this study was to determine the effect of the use of the chamber on the 3D printing machine DIY (Do It Yourself) FDM type Cartesian ender model on the quality of product dimensional accuracy results. The method used in this research is experimental by using a chamber on a 3D printing machine and using process parameters. The results of the research by testing and measuring, it is found that the chamber affects the accuracy of the product dimensions with the heat bed temperature (80 ℃), nozzle temperature (230 ℃), print speed (40 mm/s), infill density (40%) and the use of layer thickness. (0.20 mm) shows a significant result of product dimensional accuracy.
Downloads
References
Basaravaj, C. K., dan Vishwas, M. (2016), Studies on Effect of Fused Deposition Modelling Process Parameters on Ultimate Tensile Strength and Dimensional Accuracy of Nylon. Materials Science and Engineering Vol.2016, 1-12
Vishwakarma, S.K., Pandey, P., dan Gupta, N.K., (2017), Characterization of ABS Material: A Review Journal of Research in Mechanical Engineering 3 (5), pp: 13-16.
Dede Sumantri, (2012), ”Peningkatan Kinerja Mein Rapid Prototyping Berbasis Fused Deposition Modelling”, Universitas Indonesia.
Pritiansyah, Hardiansyah, dan Sugiyarto, (2019), “Manutech : Jurnal Teknologi Manufaktur Optimasi Parameter Proses 3D Printing FDM Terhadap Akurasi Dimensi Menggunakan Filament Eflex,” Manutech J. Teknol. Manufaktur, vol. 11, no. 01, pp. 0–7.
Herru Santosa Budiono, (2015), ”Pengujian Kuat Tarik Terhadap Produk Hasil 3D Printing Dengan Variasi Ketebalan Layer 0,2 mm dan 0,3 mm yang Menggunakan Bahan ABS (Acrylonitrile Butadiene Styrene)”.
Christiliana, M, Pristiansyah, and Oktariadi, Y. (2021), “Manutech : Jurnal Teknologi Manufaktur Optimasi Parameter Proses pada 3D Printing FDM terhadap Akurasi Dimensi Filament PLA Food Grade,” Manutech J. Teknol. Manufaktur, Vol. 13, No, 01, (2021)
Rayna, T., Striukova, L., (2016), From rapid prototyping to home fabrication: How 3D printing is changing business model innovation, Technological Forecasting and Social Change, Vol. 102, 214 – 224.
Mochamad Diki Muliyawan, Gatot Eka Pramono, Sumadi, (2017), Rancang Bangun Konstruksi Rangka Mesin 3d Printer Tipe Cartesian Berbasis Fused Deposition Modeling (FDM), Jurnal Teknik Mesin (JTM), vol. 06, no. 4, 225.
Bourell, D. L. (2009), A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead.
Nemzer, L. R., (2018), Data Visualization and 3D-Printing Nova Southeastern University, Bepress, Florida USA.
Ferdiansyah, A, Pristiansyah, Rollastin, B. (2021), “ Prosiding Seminar Nasional Inovasi Teknologi Terapan Optimasi Parameter Proses 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE Menggunakan Metode Taguchi L9”
Kuswanto, (2017), “Pengaruh Perpindahan Panas Terhadap Defleksi Produk 3D Printer”, President University.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 zailani hamzah, Pristiansyah Pristiansyah, Dedy Ramdhani
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
