DESAIN ALAT ANGKAT UNTUK PEMASANGAN CETAKAN DI MESIN INJEKSI PLASTIK ARBURG 420 C
Keywords:
Lifting Equipment, Injection Machine, VDI Method 2222Abstract
In this final project, a lifting device was designed for the installation of molds on the Arburg 420 C plastic injection machine due to the problems with the large dimensions of the molds that could not be installed on the machine. Therefore the purpose of this final project is to create a lifting equipment degin for the installation of a 500mm X 400mm dimension mold that can lift the mold with a maximum weight of 700kg. in this final project, Auto CAD software is used to draw 2D designs and Solidworks to analyze the stress analysis. The method used is VDI 2222 methode. This method is carried out in 4 stages: plan, concept, design, and finish. The result of this final project is a lifting equipment is able to lift the molds with a maximum weight of 700kg. techically the frame of this tool is able to lift the molds with a maximum load of 1 tonne.
Downloads
References
Djatmiko, R. D. (2008). Modul Teori Pengelasan Logam. Yogyakarta: Fakultas Teknik Univeristas Negeri Yogyakarta.
Fendi, H. d. (2018). RANCANG BANGUN CRANE DENGAN KAPASITAS ANGKAT. JURNAL MESIN SAINS TERAPAN , 1.
Hartono, P. (2015). STUDI ANALISIS PENGGUNAAN ALAT BERAT
(CRANE) SEBAGAI ALAT ANGKAT. Jurnal Konstruksia, 41.
Hatta. (2016).
Hatta. (2020). Analisis Kekuatan Rangka pada Mesin Transverse Ducting Flange (TDF). Journal of Science and Technology, 2.
Keliky, S. (2014). Pemilihan Material Bahan Rangka Body Pada Mobl Listrik.
Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, 41-48.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Amanda Renata, Muhammad Fajri Adzan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
