PENINGKATAN KINERJA MESIN PENCACAH BRONDOLAN SAWIT

Authors

  • Adam Arfandi Politeknik Manufaktur Negeri Bangka Belitung
  • Ahmad Arjuna
  • Maulana M Ibrahim
  • Angga Sateria

Keywords:

palm loose fruit, fodder, spacer, increase, manufacture

Abstract

Oil palm is an important industrial oil-producing plant that can reach 24 meters in height. The area of ​​​​oil palm plantations continues to increase in several areas in Indonesia. One of them is in the Bangka Belitung area which continues to increase rapidly every year. The area of ​​​​oil palm plantations in the province of Bangka Belitung continues to increase every year, recorded in 2021 reaching 238.60 thousand hectares, so one of the five oil palm plantations is palm kernels. Oil palm kernels are one of the wastes from oil palm plantations that can be used to make animal feed and have a lot of concentrate. Therefore, in this final project, the Performance Improvement of the Palm Oil Palm Oil Chopping Machine is designed with improvements that occur in the spacer which is easy to disassemble and the thickness of the machine. spacer, hopper formation and thickness cutting edge. This palm loose fruit chopper is capable of chopping up to 90 kg/hour of palm loose fruit with a length of 0.8-3 cm of coir.

Downloads

Download data is not yet available.

References

Anggry, A., & Subkhan, S. (2019). Uji Mesin Crusher Brondolan Sawit dengan Mata Potong Circular Saw Standar. Manutech: Jurnal Teknologi Manufaktur, 11(01), 14-19.

Argo Utomo, D. (2019)). Spesifikasi Kandungan Cangkang Sawit, . CangkangSawit.ID, diakses pada 2 Mei 2019, < https://cangkangsawit.id/bisnis-cangkang-sawit/spesifikasi-kandungan-cangkang-sawit/>.

Darmawan, H. (2004). Pengantar Perancangan Teknik. Bandung: Institut Teknologi Bandung.

Dieter, G. E. (2009). Engineering Desaign. Sigapore: McGraw Hill.

Gupta, R. K. (2005). Machine Design. New Delhi-110 055:: Eurasia Publishing House (PVT.) LTD. Ram Naga.

Hurst, K. (2006). Prinsip-prinsip Perancangan Teknik. Jakarta: Erlangga.

Ikhsanto, L. N., & Zainuddin, Z. (2019). ANALISA FILAMEN ABS DAN PLA PADA HASIL 3D PRINTER. Media Mesin: Majalah Teknik Mesin, 21(1), 9-17.

Setiadi, B. R. (2015). Metode Perancangan 3E (ECO-EFE-EFT) pada Proyek Akhir Mahasiswa: Suatu Pendekatan Sistematis. Jurnal Taman Vokasi, 794-806.

Sularso, MSME, (1997), Dasar Perencanaan dan Pemilihan Elemen Mesin, P.T. Pradnya Paramita, Jakarta

Setiadi, B. R. (2015). Metode Perancangan 3E (Eco-Efe-Efi) Pada Proyek Akhir Mahasiswa: Suatu Pendekatan Sistematis. Jurnal Taman Vokasi, 3(2).

Downloads

Published

27-09-2022

How to Cite

Arfandi, A., Arjuna, A., Ibrahim, M. M., & Sateria, A. (2022). PENINGKATAN KINERJA MESIN PENCACAH BRONDOLAN SAWIT. Prosiding Seminar Nasional Inovasi Teknologi Terapan, 2(02), 293–296. Retrieved from https://snitt.polman-babel.ac.id/index.php/snitt/article/view/347

Issue

Vol. 2 No. 02 (2022): Prosiding Seminar Nasional Inovasi Teknologi Terapan

Section

Articles

License

Copyright (c) 2022 Adam Arfandi, Ahmad Arjuna, Maulana M Ibrahim, Angga Sateria

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)