PERBAIKAN SISTEM PENGULIRAN PADA MESIN BUBUT DoALL LT 13 DI BENGKEL MEKANIK POLMAN BABEL
Keywords:
lathe, lthreading system, half-nut lever, repair, testingAbstract
The automatic threading system (half‑nut lever) on the DoALL LT‑13 lathe at Polman Babel's mechanical workshop failed to operate, disabling thread-cutting capability. This research aimed to document the repair process and post-repair functionality tests. The methods included 5 Why analysis, apron disassembly, cleaning, gear-idler clearance adjustment, gear surface lapping, and re-calibration of the half‑nut lever. Tests included functional check, dimensional accuracy, and thread cutting on three specimens: M27×3, M20×2.5, and M18×2.5. Results showed normal operation and all threads met ISO tolerance. The lathe is now functional for educational and light machining purposes.
Downloads
References
Aditya, D., & Warizki, R. (2024). Rekondisi Mesin Bubut DoAll LT.13 di Laboratorium Mekanik Polman Babel. Politeknik Manufaktur Negeri Bangka Belitung.
Junaidi, J., & Sujatmiko, A. (2024). Analisis Perawatan Mesin Bubut Baoji 1660A dengan Metode Reliability Centered Maintenance (RCM). Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer, 2(4, 259–272.
K. Li, X. Zhou, dan L. Wang, “Dynamic analysis of helical gear misalignment in lathe threading systems,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 238, no. 4, pp. 1234–1247, 2024. [Online]. Tersedia: https://journals.sagepub.com
Laumma, M. A., Yunus, K., & Haslinda , H. (2024). Reliability Centered Maintenance (RCM) pada mesin bubut di CV. Sumber Jaya Makassar. Jurnal Nasional Teknik Sipil dan Teknologi Terapan Vol. 4 No. 1 (2024): Januari 2024, 11-17.
Lubis, M. R. (2021). Analisis Perawatan Mesin Bubut Konvensional untuk Meningkatkan Efektivitas Produksi. Jurnal Teknik Mesin Unimal, 10(1), 13–21.
Nurinda, K., Fukcan, D. W., Masdani, & Pristiansyah. (2022). Rekondisi dan Pembuatan Sop Perawatan Mesin Frais Lagun Seri 17. Prosiding Seminar Nasional Inovasi Teknologi Terapan, 201 - 208.
Sidi, P., Karuniawan, B. W., & Musharofah, N. (2023). ANALISIS PENGARUH PARAMETER MESIN BUBUT KONVENSIONAL TERHADAP KESILINDRISAN PERMUKAAN BAJA ST 42 MENGGUNAKAN METODE BOX BEHNKEN DESIGN. JISO Journal of Industrial and Systems Optimization, 6(2):110-116.
ShunTool, “What causes a lathe to skip threads? Half nut wear explained,” Technical Maintenance Article, 2023. [Online]. Tersedia: https://shuntool.com/article/what-causes-a-lathe-to-skip-threads-half-nut-worn
Syaiful, & Panggabean, H. (2025). ANALISIS FOTO MAKRO TERHADAP KEKASARAN BAJA ST 60 HASIL PEMBUBUTAN FACING DI MESIN CNC HARDINGE. Jurnal Analisis Rekayasa Mesin Universitas Brawijaya.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Sandika Yudha Pirmansyah, Jhasua Pratama , Ramli Ramli, Pristiansyah Pristiansyah
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
