RANCANG BANGUN MESIN PENYORTIR DAN PENCACAH SAMPAH ORGANIK MENGGUNAKAN SENSOR
Keywords:
conveyor, recycling, R&D, sensor, wasteAbstract
Waste is one of the problems that has not been handled properly, which comes from animals, humans, and plants. Based on the problem data, one solution to reduce the increasing amount of waste is to recycle the waste. The purpose of this tool research is to design and build an organic waste sorting and shredding machine using sensors and how to test the organic waste sorting and shredding machine using sensors with a capacity of 1 kg in stages. This research method uses the R&D (Research and Development) method which starts with identifying problems and needs, literature studies, planning, design creation, testing and evaluation. From the results of this study, a design for an organic waste sorting and shredding machine using sensors that uses a 1 HP electric motor as the main drive with a pulley and belt drive transmission system was obtained. Overall, this machine functions well. Based on the results of the trials conducted in this tool research, the results of the average percentage level of the sorter to separate organic and non-organic 1kg waste in stages were 70% successful and 30% failed. And for the average percentage of the results of shredding 1kg of organic waste per process, 65% is coarse waste and 35% is fine waste.
Downloads
References
Alfita, R., Wibisono, K. A., & Anwar, M. W. (2021). Rancang Bangun Alat Pemilah Sampah Organik Dan Anorganik. Journal Zetroem, 3(1), 18-25.
Assauri, Sofyan. 2008. Manajemen Produksi dan Operasi. Jakarta: Universitas Indonesia.
Evan’s, F. G., Fadhel, F., & Epifania, P. U. (2019). Rancang Bangun Mesin Pencacah Sampah Dengan Metode“Cutting Tools Principle” (Doctoral dissertation, Politeknik Manufaktur Negeri Bangka Belitung).
Karundeng, R. G. P. (2022). Perancangan Mesin Pencacah Sampah Organik Dengan Sistem Penggerak Motor Bensin (Doctoral dissertation, Universitas Pembangunan Nasional Veteran Jakarta).
Muhamad, A. (2019). Rancang Bangun Alat Pencacah Sampah Organik Menggunakan Motor Bensin Sebagai Penggerak (Doctoral dissertation, Universitas Muhammadiyah Mataram).
Mahardika, K. R. A. (2024). Rancang Bangun Alat Pencacah Sampah Organik Kapasitas 20 Kg/Jam (Doctoral dissertation, Politeknik Negeri Bali).
Perdana, A., Rahman, A., & Kusumanto, R. D. (2023). Penerapan Sistem Pengelolaan Sampah Pada Alat Pemilah Sampah Organik Dan Anorganik Berbasis Conveyor Di Tps Tanjung Barangan. Teliska-Jurnal Teknik Elektro Politeknik Negeri Sriwijaya, 16(III November), 29-37.
Sthiefandy, A., Munaiseche, R. O., & Pomalingo, M. F. (2024). Perancangan Mesin Pencacah Sampah Organik Dengan Menggunakan Tipe Mata Pisau HAMMER. Steam Engineering, 6(1), 50-62.
Tampubolon, P. Manahan. 2004. Manajemen Operasional. Jakarta: Ghalia Indonesia.
Utomo, P. B., & Nurdiana, J. (2018). Evaluasi pembuatan kompos organik dengan menggunakan metode hot composting. Jurnal teknologi lingkungan, 2(1).
Wibysono, A. Y., Susilawati, H., & Matin, I. M. M. (2022). Rancang Bangun Alat Pemilah Sampah Organik dan Non Organik Berbasis Raspberry Pi. Fuse-teknik Elektro, 2(2), 88-96.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Surojo Surojo, Axel Fieral Ferary, Ilham Fikalius Waruwu, Robert Napitupulu
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
