PENERAPAN CORRECTIVE MAINTENANCE PADA MESIN PRESS KELAPA SAWIT DI PT GSBL DENGAN METODE 5 WHY

Authors

  • Steven Leonardo Politeknik Manufaktur Negeri Bangka Belitung
  • Yudi Yudi Politeknik Manufaktur Negeri Bangka Belitung
  • Robert Napitupulu Politeknik Manufaktur Negeri Bangka Belitung
  • Angga Sateria Politeknik Manufaktur Negeri Bangka Belitung

Keywords:

Corrective Maintenance, Screw Press, Palm Oil, 5 Whys, Machine Maintenance

Abstract

The screw press machine is a main piece of equipment in the palm oil processing process, functioning to extract oil from palm fruit. Machine damage can reduce productivity, increase downtime, and disrupt the production process. This final project aims to identify damage to the screw press machine at PT. Gunung Sawit Bina Lestari, analyze the causes of damage using the 5 Why method, and implement corrective maintenance as a repair action. The method used is descriptive with a case study approach. Data were obtained through observation, interviews, documentation, and literature study. The results showed that the main damage occurred to the screw press, bushing hollow lengthening, and hydraulic motor rubber coupling. The 5 Why analysis showed that screw press damage was caused by excessive workload and the component's service life approaching the hour meter limit, bushing damage was caused by insufficient lubrication and the absence of scheduled maintenance, while rubber coupling damage was caused by hydraulic pressure exceeding the standard. Corrective maintenance was carried out through disassembly, inspection, cleaning, lubrication, replacement of damaged components, and machine testing. The repair results showed that the machine returned to stable operation, vibration was reduced, the hydraulic system functioned normally, and the pressing process operated properl.

Downloads

Download data is not yet available.

References

Assauri, S. 2016. Manajemen Produksi dan Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia.

Corder, A.S. and Hadi, K. 1992. Teknik Manajemen Pemeliharaan. Jakarta: Erlangga.

Dhillon, B.S. 2002. Engineering Maintenance: A Modern Approach. Boca Raton: CRC Press.

Ebeling, C.E. 1997. An Introduction to Reliability and Maintainability Engineering. New York: McGraw-Hill.

Mobley, R.K. 2002. An Introduction to Predictive Maintenance. 2nd edn. Boston: Butterworth-Heinemann.

Nakajima, S. 1988. Introduction to TPM: Total Productive Maintenance. Cambridge: Productivity Press.

Pasaribu, M.I., Ritonga, D.A.A. and Irwan, A. 2021. ‘Analisis Kerusakan Mesin Screw Press Menggunakan Metode Failure Mode and Effect Analysis (FMEA) pada Pabrik Kelapa Sawit’, Jurnal Teknik Industri, 8(2), pp. 45–53.

Setyawan, A. 2023. Analisis Keandalan Mesin Screw Press Menggunakan Metode Mean Time to Failure (MTTF) pada Industri Kelapa Sawit, Jurnal Rekayasa Sistem Industri, 12(1), pp. 23–31.

Syarifuddin, Susanti, Y., Syahputra and Prasetyaningtyas, W.E. 2022. ‘Analisis Preventive Maintenance pada Mesin Screw Press di Pabrik Kelapa Sawit’, Jurnal Teknik Mesin dan Industri, 10(2), pp. 56–64.

Wireman, T. 2004. Total Productive Maintenance. New York: Industrial Press Inc.

Downloads

Published

21-08-2026

How to Cite

Leonardo, S. ., Yudi, Y., Napitupulu, R. ., & Sateria, A. . (2026). PENERAPAN CORRECTIVE MAINTENANCE PADA MESIN PRESS KELAPA SAWIT DI PT GSBL DENGAN METODE 5 WHY. Prosiding Seminar Nasional Inovasi Teknologi Terapan, 6(1), 406–411. Retrieved from https://snitt.polman-babel.ac.id/index.php/snitt/article/view/789

Issue

Vol. 6 No. 1 (2026): Prosiding Seminar Nasional Inovasi Teknologi Terapan

Section

Articles

License

Copyright (c) 2026 Steven Leonardo, Yudi Yudi, Robert Napitupulu, Angga Sateria

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)

<< < 1 2 3 4