RANCANG BANGUN ROBOT CORNER LAWN MOWER DENGAN SISTEM KENDALI REMOTE CONTROL FLYSKY BERBASIS ARDUINO MEGA 2560
Keywords:
Lawn Mower Robot, Remote Control System, Solar CellAbstract
In the airport runway area, grass maintenance must be carried out in the runway area. In the final project, a lawn mower will be made with a remote control system and utilizing solar cells so that it can help PT. Angkasa Pura II Branch H.A.S. Hanandjoeddin Belitung in the maintenance of the grass on the airport runway. This research method was carried out by collecting variable data, designing tools in the form of designs and block diagrams of robot work systems and conducting tests on robots. Based on the test results, this robot can be controlled up to 2km and for monitoring systems can be accessed up to 40m. The use of battery power on the robot can only be used for 1 hour. Full battery charging using a solar cell takes 15 hours in hot sun conditions. It can be concluded that this corner lawn mower robot can work with a remote control system using solar cells.
Downloads
References
Azis Isrofi, Shoffin Nahwa Utama, Oddy Virgantara Putra, “Rancang Bangun Robot Pemotong Rumput Otomatis Menggunakan Wireless Kontroler Modul Esp32-Cam Berbasis Internet of Things (IoT)”, Jurnal Teknoinfo, Vol. 15, No. 1, Pp. 45-55, 2021.
Bambang Hari Purwoto, dkk., “Efisiensi Penggunaan Panel Surya Sebagai Sumber Energi Alternatif”, Jurnal Teknik Elektro, Vol. 18, No. 01, 2018.
Erboy Setiawan, “Analisis Mata Pisau Pada Mesin Pemotong Rumput Menggunakan Remote Control”, Laporan Tugas Akhir, Politeknik Harapan Bersama, Tegal, 2021.
Fikih Falukhi, “Analisis Sistem Pengisian Baterai Pada Mesin Pemotong Rumput Remote Control”, Laporan Tugas Akhir, Politeknik Harapan Bersama, Tegal, 2021.
Indra Krista, Elang Derdian M, ST, MT, Dr. Dedy Suryadi, ST, MT., “Rancang Bangun Robot Terbang Model Tricopter Menggunakan STM32F”, Vol 2, No 1, 2018.
Jecky Yusakh Akay, dkk., “Rancang Bangun Alat Pemotong Rumput Otomatis”, Vol. 2, No. 4, e-jurnalTeknik Elektro dan Komputer, 2013
M. Khairul Amri Rosa, Reza Satria Rinaldi, Ridho Illahi, “Rancang Bangun Prototype Mesin Pemotong Rumput Kendali Jarak Jauh Menggunakan Aplikasi Android”, Jurnal Amplifier, Vol. 9, No. 1, Pp. 1-8, 2019.
Monica, Muhammad Haz Fatahillah A, “Sistem Kontrol Dan Monitoring Lampu Taman Polmanbabel Menggunakan Panel Surya Berbasis Iot”, Laporan Proyek Akhir, Politeknik Manufaktur Negeri Bangka Belitung, 2022.
Setya Permana Sutisna, Edi Sutoyo, Dicky Nur Pariatiara, “Rancang Bangun Pisau Rotari Robot Pemotong Rumput”, Jurnal Ilmiah Teknik Mesin, Vol. 6, No. 1, 2020.
Yonanda, Yoga Bagus, “Monitoring Arus Beban yang Tersalurkan Pada Gardu Induk Pltu Gresik Dengan Android Menggunakan Bluetooth HC-O5 Berbasis Mikrokontroler ARM”, PhD Thesis, Universitas Muhammadiyah, Gersik, 2017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Aliyah Famela Puteri, Aprenza Winarlin, Irvan Debylian, Ocsirendi Ocsirendi, Indra Feriadi

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.