RANCANG BANGUN MESIN PENCETAK BRIKET ARANG TEMPURUNG KELAPA
Keywords:
Printing machine, charcoal briquettes, coconut shell, VDI 2222Abstract
Charcoal briquettes are charcoal sticks made from coconut shells and molded using a machine to produce very high heat and can burn for a long time. The use of charcoal briquettes from coconut shells will contribute to reducing dependence on firewood, LPG gas and kerosene, the availability of which is running low and cannot be renewed, especially for communities in several Sungailiat areas and at the same time can support the use of coconut shell waste as a material. burn.This research aims to design and build a Coconut Shell Charcoal Briquette Printing Machine with a capacity of 12kg/hour and design a maintenance system for the Coconut Shell Charcoal Briquette Printing Machine so that it is ready for use and extends its service life. The design method used in this research is Verein Deutsche Ingenieuer (VDI 2222).The results of research on the Coconut Charcoal Briquette Printing Machine using the VDI 2222 design method, namely printing Coconut Charcoal Briquettes with a length of 60cm and a capacity of 12kg/hour. The maintenance system on this machine uses planned maintenance and inspections for operators to carry out independent maintenance.
Downloads
References
Arisandi, D., Novianti, F., & Krisnandhy, R. M. F. (2022). Rancang Bangun Mesin Pencetak Briket Arang. Politeknik Manufaktur Negeri Bangka Belitung, 1(1), 1–87.
Hulopi, M., & Amirudin, A. (2023). Perancangan Alat Pencetak Briket Arang Tempurung Kelapa Menggunakan Hydraulic. Journal Of Renewable Energy Engineering, 1(1), 12–15. https://doi.org/10.56190/jree.v1i1.9
Isa, I. (2012). Briket Arang Dan Arang Aktif Dari Limbah Tongkol Jagung. Universitas Negeri Gorontalo, 1–50. http://repository.ung.ac.id/get/simlit/1/168/2/ Briket-Arang-Dan-Arang-Aktif-Dari-Limbah-Tongkol-Jagung.pdf
Kalsum, U. (2016). Pembuatan Briket Arang Dari Campuran Limbah Tongkol Jagung, Kulit Durian Dan Serbuk Gergaji Menggunakan Perekat Tapioka. Distilasi, 1(1), 42–50.
Kurniawan, Ade. (2013). Pembuatan Briket Arang dari Campuran Buah Bintaro dan Bambu Betung Menggunakan Perekat Amilum. Jurusan Teknik Kimia POLSRI.
Lestari, L., Aripin, Yanti, Zainudin, Sukmawati, & Marliani. (2010). Analisis Kualitas Briket Arang Tongkol Jagung yang Menggunakan Bahan Perekat Sagu dan Kanji. Jurnal Aplikasi Fisika, 6(2), 93-96.
Muhammad Fadillah, Minada Syahputra, T. Hasballah, & Hodiantua Sitanggang. (2022). Rancang Bangun Mesin Pencetak Arang Briket Dengan Kapasitas 15 Kg/Jam. Teknologi Mesin Uda, 3(2), 71–81.
Pristiansyah,H. S., 2021. MESIN PENCACAH PELEPAH DAN DAUN KELAPA SAWIT UNTUK PAKAN SAPI DI DESA SEMPAN. Jurnal Pengabdian Masyarakat Polmanbabel, 1(01), 1-7
Putrawan, A. (2010). Sistem Perawatan. (http://andreasputrawan.blogspot.co.id/2010/02/sistem-perawatan_16.html). 30 Juni 2024 (14.15).
Sularso dan K. Suga. (2002). DASAR PERENCANAAN DAN PEMILIHAN ELEMEN MESIN. PT. Pradnya Paramita,.
Sutiyono. (2008). Pembuatan Briket Arang dari Tempurung Kelapa dengan Bahan Pengikat Tetes Tebu dan Tapioka. Palembang.
Y. Y. Erlangga dan H. Setiawan. (2013). Perancangan Mesin Pengolah Air Bersih Bergerak Dengan Menggunakan Sistem Modular Untuk Penaggulangan Keadaan Darurat Air.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Aldo Firnando, Bayu Anggara, Edwin Aldrin, Pristiansyah, Muhammad Haritsah Amrullah
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
