ANALISA KEBUTUHAN DAYA MOTOR PADA MESIN FILAMEN 3D PRINTER
Keywords:
3D printer, filament, plastic bottle waste, VDI 2222Abstract
The issue of plastic bottle waste in Indonesia, particularly in the Bangka Belitung region, has become a serious environmental concern due to the low recycling rate. This study aims to design and develop an extrusion device to convert PET plastic bottle waste into 3D printer filament with a diameter of 2.85 mm. The design method follows the VDI 2222 standard, encompassing data collection, conceptualization, component design, prototype development, and testing stages. The system utilizes a stepper motor to drive the screw, a heater band for the heating process, and a simple cooling mechanism. Test results indicate that the device can produce filament with a dimensional tolerance of ±0.05 mm and a production capacity of up to 1 kg per hour. This innovation is expected to serve as an appropriate solution for managing plastic waste and to support the creative industry based on 3D printing technology.
Downloads
References
Astuti, A. D., Wahyudi, J., Ernawati, A., & Aini, S. Q. (2020). Kajian Pendirian Usaha Biji Plastik di Kabupaten Pati, Jawa Tengah. Jurnal Litbang: Media Informasi Penelitian, Pengembangan Dan IPTEK, 16(2), 95–112. https://doi.org/10.33658/jl.v16i2.204
Bunganaen, W., Toai, Y., & Mangesa, D. P. (2022). Rancang Bangun Mesin Pemipil Jagung Dengan Metode VDI 2222. LONTAR Jurnal Teknik Mesin Undana, 9(02), 53–59. https://doi.org/10.35508/ljtmu.v9i02.9322
Kevin, Fatwa, M. Z., & Jufri, W. (2023). Pengembangan Mesin Ektrusi Filamen 3D Printer dengan Sistem kendali Otomatis. Jurusan Teknik Mesin Politeknik Negeri Ujung Pandang, Makasar.
Pristiandaru, D. L. (2025). Studi: Indonesia Penghasil Polusi Plastik Terbesar Ketiga di Dunia. Kompas. https://lestari.kompas.com/read/2025/02/12/170000086/studi-indonesia-penghasil-polusi-plastik-terbesar-ketiga-di-dunia
Riskiana, R., Effendi, H., & Wardiatno, Y. (2020). Abundance and composition of plastic waste in Baturusa watershed of Bangka Belitung Islands Province. Jurnal Pengelolaan Sumberdaya Alam Dan Lingkungan, 10(4), 650–659. https://doi.org/10.29244/jpsl.10.4.650-659
Sonya, R., Haerdy, M., & Nurzannah, F. (2023). Potensi dan Kendala Penerapan Teknologi 3D printing dalam Penyediaan Hunian Layak dan Terjangkau di Indonesia. XI(3), 15–22.
Sularso, I., & Suga, K. (2008). Dasar Perancangan Dan Pemilihan Elemen Mesin. Paper Knowledge . Toward a Media History of Documents, 200.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Junizar Junizar, Muhammad Zuhri, Hasdiansah Hasdiansah, Sugianto Sugianto
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
