MESIN PENGADUK PUPUK CAIR
Keywords:
liquid fertilizer, fertilizer mixer, mixing machine, mixerAbstract
Currently, mixing liquid fertilizer is still done manually, using a stick or spoon. This method has several disadvantages, such as requiring a long time, a lot of energy, and cannot produce a uniform fertilizer concentration. In making this final project, the VDI 2222 design method became the method for working on this final project in order to obtain an appropriate and efficient design. From the design results obtained using this method, the liquid fertilizer mixer machine uses an electric motor as the drive on the machine. The stirring system uses a triangular plate as a stirring tool, and is equipped with a chopping knife at the bottom to crush solid waste such as animal waste and other organic materials. The trial results showed that the machine was able to mix liquid fertilizer evenly in a relatively short time of 5 minutes with 30 liters of material or liquid fertilizer being mixed. Thus, this machine can be an efficient and applicable solution in supporting liquid fertilizer production activities in the agricultural sector.
Downloads
References
Ady, D. K. (2015). Perancangan Sistem Mekanik Penggerak Sumbu pada Modifikasi Mesin Bubut Konvensional Menjadi Mesin Bubut CNC. Universitas Negeri Yogyakarta
Arifin, M., Yusron, M., & Ramadhan, A. (2022). Pengaruh Pupuk Organik Cair terhadap Pertumbuhan Tanaman dan Kualitas Tanah. Jurnal Agroteknologi Tropika, 10(1), 15–23.
Dila Marinda, Imam Masruki, dan Latif Sudirman, “RANCANG BANGUN MESIN PENCAIR LIMBAH PLASTIK JENIS LDPE TIPE “SCREW”” 2021
Edwin, Khevin Andrianto , dan Dwi Junizar, (2021)“RANCANG BANGUN MESIN PENGADUK PUPUK KOMPOS PROYEK AKHIR”.
Hartatik, W., Prasetyo, B. H., & Ardiansyah, R. (2020). Peran Unsur Hara Makro dan Mikro dalam Pertumbuhan dan Hasil Tanaman. Jurnal Sumberdaya Lahan, 14(2), 101–110.
Hermawan, R., & Prakoso, A. (2022). Analisis Kinerja Kopling Fleksibel dalam Sistem Transmisi Daya Mekanis pada Aplikasi Industri Ringan. Jurnal Teknik Mesin Inovatif, 9(2), 89–96.
Kartika, Suryono, & Kusumastuti (2025). Penerapan Teknologi Mesin Pembuat Pupuk Organik Otomatis
Kurniawan, A., & Anam, C. (2021). Perancangan dan Uji Kinerja Mesin Pengaduk Pupuk Cair Berbasis Gear Planetary. Jurnal Teknologi Mesin dan Pertanian, 9(2), 45–53.
N. Tanti, N. Nurjannah, and R. Kalla, (2020)“Pembuatan Pupuk Organik Cair Dengan Cara Aerob,” ILTEK J. Teknol., vol. 14, no. 2, pp.
Nurjanah, L., & Syahputra, A. (2021). Pemanfaatan Pupuk Organik Cair dari Limbah Sayuran terhadap Pertumbuhan Tanaman Kangkung. Jurnal Agroindustri dan Bioteknologi, 6(1), 12–19.
Pratama, Y., & Hidayat, T. (2021). Analisis Material dan Geometri Mata Pisau pada Mesin Pencacah Limbah Plastik Skala Industri Rumah Tangga. Jurnal Teknik Mesin Terapan, 5(2), 84–91
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jekki Radiansyah, Amrullah Amrullah, Subkhan Subkhan, Idiar Idiar
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
