PENERAPAN PREDICTIVE MAINTENANCE UNTUK MENDETEKSI CACAT RODA GIGI LEBIH DINI
Keywords:
Predictive Maintenance, Vibration Analysis, Spur Gears, Helical Gears, Wear, SpallingAbstract
Gear transmission systems are critical components in industrial machinery that are susceptible to degradation due to continuous operational loads. Early detection of gear damage is essential to prevent catastrophic failure and minimize production downtime. This study aims to implement a predictive maintenance system based on vibration analysis and machine learning to detect and classify the conditions of spur gears and helical gears. The damage scenarios tested include wear, normal operating conditions, and structural damage such as chipping or fractures. Vibration data were acquired using a triaxial accelerometer on a gearbox test rig.
Downloads
References
A. Radu, M. Florescu, and D. Popescu, "Helical Gearbox Defect Detection with Machine Learning Using Raw Vibration Signals," Sensors, vol. 24, no. 11, p. 3337, 2024.
M. Z. Al-Amri, "A Review of Spur Gear Fault Diagnosis: Monitoring Methods and Predictive Models," NTU Journal of Engineering and Technology, vol. 3, no. 2, pp. 45–58, 2025.
F. K. Zhou, H. Wang, and Y. Liu, "A review of dynamics-based failure modeling and diagnosis for industrial gear systems," Mechanism and Machine Theory, vol. 204, p. 105820, 2025.
J. W. Harrison and L. Zhang, "Enhanced fault diagnosis of helical gears: advanced dynamic modeling and experimental validation," Structural Health Monitoring, vol. 25, no. 4, pp. 1120–1135, 2025.
K. H. Smythe, "Gear Wear Mechanisms, Monitoring Techniques and Their Potential Use in Gear Predictive Maintenance," International Journal of Prognostics and Health Management, vol. 16, no. 1, pp. 102–115, 2025.
R. Widiyanto, "Deteksi Cacat Roda Gigi pada Sistem Transmisi Fan Industri Menggunakan Support Vector Machine," Jurnal Teknik Mesin dan Otomasi, vol. 12, no. 1, pp. 12–21, 2024.
S. M. K. Al-Sadi and J. A. Al-Mousawi, "Advanced Feature Extraction Techniques for Early Fault Diagnosis in Spur and Helical Gearboxes under Variable Loading Conditions," Journal of Vibration Engineering & Technologies, vol. 14, no. 2, pp. 215–228, 2026.
S. Prasetyo and H. Purwanto, "Deteksi Kerusakan Roda Gigi Dengan Analisis Sinyal Getaran pada Sistem Transmisi Gearbox WPA 50," Jurnal Inovasi Sains dan Mekanikal, vol. 7, no. 2, pp. 89–97, 2025.
T. R. Kumar, "A review on diagnostic and prognostic approaches for gears under distributed and localized faults," Structural Health Monitoring, vol. 20, no. 3, pp. 1432–1455, 2021.
R. H. Nugroho, "Penerapan Metode Klasifikasi Berbasis Machine Learning untuk Pemantauan Kondisi Keausan Komponen Transmisi Industri," Jurnal Teknik Mesin dan Sistem Manufaktur, vol. 8, no. 1, pp. 45–54, 2026.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Terkisah Alif Rizky, Wahyu Dirgantara, Ariyanto Ariyanto, Ramli Ramli
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
