PERBAIKAN COUPLING PADA POROS GRINDING WHEEL MESIN GERINDA DATAR REFORM PSGS-4070 AH
Keywords:
Surface Grinding Machine, Repair, Grinding Wheel, Coupling, 5 WhyAbstract
The Reform PSGS-4070 AH surface grinding machine in the Mechanical Laboratory of the Bangka Belitung State Polytechnic of Manufacturing is experiencing issues with the grinding wheel not rotating and producing abnormal sounds when activated. Due to this malfunction, the surface grinding machine cannot be used for learning and production processes. The final project aims to identify the cause of the damage and repair the grinding wheel on the surface grinding machine using observation, manual book study, interviews with technicians, and 5 Why analysis methods. The repair was carried out through identification, disassembly, replacement of damaged components, and reassembly. Post-repair testing showed that the grinding wheel had returned to normal rotation, and the abnormal sounds had disappeared. This project also recommends preventive maintenance to maintain the performance of the machine.
Downloads
References
ALIF, Y. P. (2021). Pentingnya Suku Cadang Dalam Melaksanakan Perawatan Dan Perbaikan Induk Di Kmn. Putra Leo. Repository Universitas Maritim Amni (UNIMAR AMNI) Semarang. http://repository.unimar-amni.ac.id/3414/.
Djulianto, H. (2017). Predictive Maintenance (Perawatan Prediktif). Academia.edu.
Hamdy, Muhammad Ihsan; RikaTaslim; Nyvia Andhen Sury. (2024). Wear Analysis and Corective Maintenance Worm Screw Press at PT. XYZ. International Journal of Innovation in Mechanical Construction and Energy (IJIMCE) 1(1): 38-45. https://ijimce.ppj.unp.ac.id/index.php/ijimce/ article/view/18/12.
Kasih Nurinda, D. W. (2022). Rekondisi dan Pembuatan SOP Perawatan Mesin Frais Lagun Seri 17. Prosiding Seminar Nasional Inovasi Teknologi Terapan. Hal. 201-209.
Mahmudi, H. (2021). Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin Pencacah. (2021). Jurnal Mesin Nusantara, 4(1), 40-46. https://doi.org/10.29407/jmn.v4i1.16201.
Sudja Rizki Maulana. (2023). Analisis Pengaruh Feeding Pada Proses Grinding Journal Terhadap Nilai Kualitas Camshaft Type 2TNV70 Pasca IQT. KALPIKA, 19(2): 32–46. https://doi.org/10.61488/kalpika.v19i2.47.
Mulya, A. E. (2022). Pengaruh Preventive Maintenance dan Breakdown Maintenance terhadap Kelancaran Proses Produksi. Jurnal Ekonomi, 49-54.
Siagian, T. (2022). Analisa Getaran Dan Koefisien Korelasi Antara Getaran Pada Mesin (Engine) Dan Tempat Duduk Operator (Seat) Dengan Variasi Tingkat Kebisingan Mesin Forklift Type Fd 30 Pa Sumitomo. Jurnal Al Ulum LPPM Universitas Al Washiyah Medan 10(2): 55-60.
Sihotang, Z. F. (2022). Pengaruh Preventive Maintenance dan Corective Maintenance terhadap Reliability Maintenance pada mesin pengolahan CPO di PKS PTPN V Lubuk Dalam. JOM FEB Universitas Riau 9 (2): 1-15. https://paperity.org/p/342164549/pengaruh-preventive-maintenance-dan-corrective-maintenance-terhadap-reliability.
Sulistyo, E., & Yudo, E. (2019). Rancang Bangun Mesin Pengaduk Adonan Ampiang. Manutech: Jurnal Teknologi Manufaktur 8 (1): 7-11. https://doi.org/10.33504/manutech.v8i01.76.
Sutarto, S; Kaharudin, Nur Mubin, dan Didi Suryadi. (2020). Implementasi Pemeliharaan Preventif: Pengungkapan Komitmen Manejemen, Kondisi Fasilitas Dan Keterampilan. Jurnal Pengembangan Wiraswasta 22 (3): 151-162. http://dx.doi.org/10.33370/jpw.v22i3.488.
Wirawan, E., & Minto. (2021). Penerapan Metode PDCA dan 5 Why Analysis pada WTP Section di PT Kebun Tebu Mas. Jurnal Penelitian Bidang Inovasi & Pengelolaan Industri 1(01): 1–10. https://doi.org/10.33752/invantri. v1i01.1825.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Aldi Yusuf Saputra, Ratu Aisyah, Eko Yudo, Ariyanto Ariyanto
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
