PERANCANGAN MESIN PENCUCI KERANJANG INDUSTRI DI PT. BERDIKARI METAL ENGINEERING
Keywords:
pump motor power, jet pump, crate washing machine, automatic washing, VDI 2222Abstract
Industrial crate washing is a crucial activity in maintaining hygiene and operational efficiency within the manufacturing sector. PT. Berdikari Metal Engineering faces challenges due to a manual washing process that is labor-intensive, time-consuming, and only capable of cleaning 25 crates per day out of a 150-crate target. This study aims to design an automatic crate washing machine with a focus on high-pressure washing systems to enhance process effectiveness. The design method follows the VDI 2222 approach, consisting of planning, conceptualization, design, and simulation stages. The machine features three main zones: washing, rinsing, and drying, where washing and rinsing utilize a jet pump system. Technical calculations determined that the required motor pump power for the washing zone is 10 HP, based on the number of nozzles, flow rate, and spray pressure of 80 psi. Simulation results using SolidWorks indicate that the machine structure is safe, with stress and safety factor values within acceptable limits. In conclusion, the design successfully delivers an efficient washing system that meets the company's daily production targets and reduces reliance on manual labor.
Downloads
References
Adhiharto, R., Nusantoro, A. B., Komara, A. I., & Wigenaputra, D. H. (2023). Perancangan Ulang dan Analisa Mesin Benchtop Injection Molding dengan Metode VDI 2222. JTRM (Jurnal Teknologi Dan Rekayasa Manufaktur), 5(2), 153–168. https://doi.org/10.48182/jtrm.v5i2.148
Bunganaen, W., Toai, Y., & Mangesa, D. P. (2022). Rancang Bangun Mesin Pemipil Jagung Dengan Metode VDI 2222. LONTAR Jurnal Teknik Mesin Undana, 9(02), 53–59. https://doi.org/10.35508/ljtmu.v9i02.9322
Damayantie, I., & Januar, A. (2018). Perancangan Efisiensi Penyimpanan Keranjang Dalam Keadaan Kosong. Inosains, 13(2), 107–112.
Made Whidi. (2021). Menentukan Daya Pompa (Daya Air, Daya Poros, dan Daya Motor). Madewhidi. https://www.madewhidi.com/2021/04/menentukan-daya-pompa-daya-air-daya.html
Nofirza, N., Hartati, M., Aprizon, A., Anwardi, A., & Harpito, H. (2023). Implementasi Metode Verein Deutscher Ingenieure (VDI) 2222 Dalam Rekayasa Mesin Pencetak Pelet Ikan. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 9(2), 414. https://doi.org/10.24014/jti.v9i2.23095
Prasetyo, H., Yuwono, N. K., Prabowo, A. A., Prasetya, V. A., & Laurentinus, Y. (2020). Rancang Bangun Mesin Aqueous Cleaning Spray untuk Otomatisasi Proses Pencucian Produk High Speed Stamping di PT. ATMI IGI. JMPM (Jurnal Material Dan Proses Manufaktur), 4(1), 20–27. https://doi.org/10.18196/jmpm.4149
Radityo Herdianto. (2022). Cuci Mobil dengan Air Bertekanan Tinggi? Begini Cara yang Disarankan. Gridoto. https://www.gridoto.com/read/223178034/cuci-mobil-dengan-air-bertekanan-tinggi-begini-cara-yang-disarankan
Windarta, & Rizkiyanto, R. (2016). Perancangan Mesin Pembersih Untuk Part Internal Alat Berat Dengan Sistem Pneumatik. Jurnal Ilmiah Teknik Mesin, 10(1).
Yosua, P., Santoso, D. B., & Stefanie, A. (2021). Rancang Bangun Automatic Washing and Drying System untuk Mesin Pencuci Cylinder Block Motor. Jurnal Ilmiah Wahana Pendidikan, 7(4), 430–444. https://doi.org/10.5281/zenodo.5167080
Yuliani, R. L., Purwanti, E., & Pantiwati, Y. (2015). Effect of Waste Laundry Detergent Industry Against Mortality and Physiology Index of Nile Tilapia (Oreochromis Niloticus). Seminar Nasional XII Pendidikan Biologi FKIP UNS, 822–828.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Areza Muharramin, Reguel Samosir, Robert Napitupulu, Muhammad Haritsah Amrullah
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
