PERANCANGAN DAN PENERAPAN SPESIFIKASI PERAWATAN PREVENTIF REPARASI KECIL PADA MESIN BUBUT DOALL LT13
Keywords:
DoAll lathe LT13, operating procedure, preventive maintenance, small repair, standardAbstract
Polmanbabel mechanical workshop laboratory has a variety of machine tools that are often used for student practicum and production activities, one of which is the DoAll LT 13 brand lathe. The DoAll LT13 brand lathe has several parts that often experience damage such as the sled, loose head (tail stock), thread system, cooling system, and brakes. So maintenance is needed so that the machine is always ready to be used for practicum activities and production activities. One of the treatments that can be done is preventive maintenance of small repairs. After collecting data, disassembling, inspecting, and assembling, the maintenance specification was designed. The result of the process is a small repair preventive maintenance specification that includes disassembly, inspection, and assembly of top slide, cross slide, tail stock, and cooling system components. The last stage applies the minor repair preventive maintenance specifications to see whether the time and process sequence are appropriate or not. The results of the application of preventive maintenance specifications for small repairs the specifications that have been made include the process of disassembly, inspection, and assembly are in accordance with the DoAll LT 13 brand lathe. The total time required to carry out the small repair process is 1 hour, 18 minutes, 36 seconds. The total time includes the process of disassembling components 29 minutes 39 seconds, checking components 10 minutes, and assembling components 39 minutes 1 second.
Downloads
References
Al Amin, K. R., & Amarullah, M. Z. (2019). Rekondisi Mesin Bubut Mawitec D-0-0 Bu-15 Di Laboratorium Mekanik Politeknik Manufaktur Negeri Bangka Belitung. Creative Commons Attribution Non-Commercial Share Alike.
Company, D. (1996). Part Manual. Des Palines Illinios: North Laurel Avenue.
Fajar Aswin, M. R. (2017). Rekondisi Mesin Bubut Doall Lt 13 Bu01 Di Laboratorium Mekanik Politeknik Manufaktur Negeri Bangka Belitung. Manutech : Jurnal Teknologi Manufaktur, 9(01), 24–32, 24.
Garg, H.P. (2002). Industrial Maintenance. Ram Ragar, New Delhi-110 055: S. Chand & Company Ltd.
Indra Feriadi, S. M. (2022). Modul Praktik Perawatan Pencegahan. Sungailiat: Politeknik Manufaktur Negeri Bangka Belitung.
Iwan Kosawara, S. (2004). Membongkar, Mengganti Dan Merakit Komponen Komponen Permesinan. Departemen Pendidikan Nasional.
Octora, D. T., & sari, F. S. (2022). Rekondisi Mesin Bubut Doall Lt 13 Di Laboratorium Mekanik Politeknik Manufaktur Negeri Bangka Belitung. Seminar Nasional Inovasi Teknologi Terapan.
Riadi, M. (2019, July 6). Tujuan, Fungsi, Jenis dan Kegiatan Perawatan (Maintenance). Retrieved from KAJIANPUSTAKA:https://www.kajianpustaka.com/2019/07/tujuan-fungsi-jenis-dan-kegiatan-perawatan-maintenance.html
Shandong Tsinfa CNC Equipment Co, L. (2018, December 18). Mesin Bubut Pendahuluan: 16 Jenis Mesin Bubut. Retrieved from TSINFA: https://www.tsinfa.com/id/lathe-machine-introduction-16-types-of-lathe-machine/
Syahabuddin, A. (2019). Analisis Perawatan Mesin Bubut Cy-L1640g Dengan Metode Realianility Centered Maintenance (Rcm) Di Pt. Polymindo Permata. JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri), 2(1), 27., 27.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Yasa Awaludin, Bagas Dwi Admoko, Indra Feriadi, Muhammad Riva'i
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.