RANCANG BANGUN MESIN PENCETAK BATA BETON PEJAL
Keywords:
Making Solid Concrete Bricks, Production Time, Press MachineAbstract
The development of science and technology has increased very rapidly. This situation has an impact on all areas of human life, one of which is the production of concrete bricks. So far, the manufacture of concrete bricks made manually has not been able to produce fast time efficiency. From the results of a survey conducted, the process of making concrete bricks has not been able to produce efficient time. Because products with low capacity and quality are not standard concrete bricks like those on the market. From these problems there needs to be innovation that supports a better production process. The goal to be achieved is to design a machine to print solid concrete bricks with a capacity of 6 solid concrete bricks in a short time. 1 minute in one process. The method that will be carried out is machine design, calculation, manufacturing process. The method for designing and manufacturing a solid concrete brick molding machine refers to VDI 2222. From the stages of the method carried out, the design and construction of a solid concrete brick molding machine is obtained. From the trial, the expected result is a die press design that can produce 6 solid concrete bricks in one press with 1 minute.
Downloads
References
A Irfanurrosyidin, (2021), Landasan toeri 2.1Bata Beton Pejal,Unisla.
Alrisallbalni. (2016, 05). Metode peralncalngaln VDI 2222.
Andri Septian,Irfan Susanto,(2018),”Desain Alat Interlocking Dengan Metode Handpress”,Laporan Proyek Akhir,Politeknik Manufaktur Timah Bangka Belitung,Sungailiat.
Arang”,Laporan Proyek Akhir,Politeknik Manufaktur Negeri Bangka Belitung,Sungailiat.
Dino Arisandi, Fatjri Novianti, dan Raden Mochammad Fery Krisnandhy,(2022),”Rancang Bangun Mesin Pencetak Briket
Harun Mallisa. 2011. Studi Kelayakan Kualitas Batako Hasil Produksi Industri di Kota Palu .Palu:Jurnal Fakultas Teknik Universitas Tadulako Palu.
Homearchitecture, Jenis Profil Baja Yang Sering Digunakan di Indonesia, Diakses pada 20 Mei 2018,
Komalral, Al. & Salepudin, 2014. Alplikalsi Metode VDI 2222 Paldal Proses Peralncalngaln Welding Fixture untuk Salmbungaln Cerebong Dngaln Teknologi CAlD/CAlE. Jurnall Ilmialh Mesin Cylinder, Volume 1(2), pp. 1-8.
Polman Timah. 2006. Elemen Mesin , Sungailiat: Politeknik Manufaktur Timah.
Sabina, Suwito,(2022),”Rancang Bangun Alat Penggiris Pempek Menjadi Kemplang”Laporan Proyek Akhir,Politeknik Manufaktur Negeri Bangka Belitung,Sungailiat.
Yefri Chan. 2010. Elemen Mesin Baut dan Mur,Jakarta: Universitas Darma Persada.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Rayhan Fajar, Kiki Kiki, M Nizar Syarif , Ilham Ary Wahyudie, Subkhan Subkhan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.