IDENTIFIKASI DAN PERBAIKAN KERUSAKAN MESIN BUBUT AJAX MELALUI METODE ANALISIS AKAR MASALAH
Keywords:
Cross slide, Cross Screw, RCFA, 5 Why’s, lathe machineAbstract
Lathe transverse slide jamming can disrupt the machining process and reduce the quality of work results, on the Ajax 200 E lathe used, damage was found such as a jammed cross slide through the Root Cause Failure Analysis (RFCA) approach and the 5 Why’s method, finishing that the main cause of damage was that the Cross Screw was bent which caused the slide movement to become jerky. After straightening the Cross Screw, the problem was resolved. Observations showed that the slide movement returned to normal. This study emphasizes the importance of technical documentation and work procedures in preventing further damage.
Downloads
References
Destree Cristian, A. S. (2020). Penerapan Metode Root Cause Analysis ( RCA ) Untuk Menentukan Akar Penyebab Keluhan Konsumen. Jurnal Poros Teknik Mesin UNSRAT, 113-123.
Dwipa, P. ,. (2022). Laporan PA Hafizh dan Dwipa. Retrieved from Repository Polman Babel ( Politeknik Manufaktur Negeri Bangka Belitung ): https://repository.polman-babel.ac.id/id/eprint/686/
Heinz P. Bloch, F. K. (2012). Machinery Failure Analysis and Troubleshooting. Butterworth-Heinemann (an imprint of Elsevier) 2012.
Imam Sodikin, C. I. (2004). Penjadwalan Perawatan Mesin Dengan Metode Preventif Maintenance dan Prediktif Maintenance ( Studi Kasus Di PLTD Kota Masohi ). Jurnal Tekstil ( JUTE ), 37-48.
Muhammad Tubagus Aditya, W. J. (2020). Pengaruh Kecepatan Spindle Terhadap Hasil Pembubutan Oblique dan Orthogonal Material Tembaga Diameter 32 Pada Mesin Bubut Konvensional. Mesin Bubut, 1.
Muslih Nasution, A. B. (2021). Manfaat Perlunya Manajemen Perawatan Untuk Bengkel Maupun Industri. Buletin Utama Teknik, 248-252.
Pranowo, I. D. (2019). Sistem Dan Manajemen Pemeliharaan. Jl.Rajawali, G. Elang 6, No 3, Drono, Sardonoharjo, Ngaglik, Sleman: CV BUDI UTAMA.
Rendy Revo Runtu, J. S. (2015). Analisis kemampuan dan keadilan mesin bubut weiler primus melalui pengujian karakteristik statik menurut standar iso 1708. Pengujian karakteristik statik menurut standard iso 1708, 70.
Sahoo, D. T. (2021). Root Cause Failure Analysis:A Guide to Improve Plant Reliability. Registered Office John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, USA, Editorial Office 111 River Street, Hoboken, NJ 07030, USA: John Wiley & Sons, Inc.
Santoso, H. B. (2018, Januari 29). Pengaturan Kecepatan Spindle Mesin Bubut Dengan Kontroler PID Agar Kecepatan Potong Benda Kerja Tetap Konstan. Tugas Akhir, pp. 13-14.
Sriwati, M. K. ( 2024). Modul Praktikum Instrumentasi dan Pengukuran Besaran Listrik. Al-Gazali Journal Of Mechanical Engineering, 14 - 23.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Fariez Rosanova Rosanova, Muhammad Riduan, Indra Feriadi, Tuparjono Tuparjono
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
