RANCANG BANGUN MESIN PENGUPAS KULIT KENTANG
Keywords:
Potatoes, Peeling Machine, VDI 2222Abstract
The potato peeler machine was designed as a solution to overcome the problem of manual peeling, which requires considerable time and effort. The objective of this final project is to design a potato peeler with a capacity of 3 kg per 3 minutes and to develop a semi-automatic device to support work efficiency. The design method refers to the VDI 2222 approach, which consists of need analysis, concept development, calculation, prototype fabrication, and testing. The test results show that the machine is capable of peeling potatoes with a success rate of up to 80%. The machine operates stably and is safe to use on a small to medium scale. In conclusion, this potato peeler machine was successfully developed according to its objectives and is able to provide an applicable and efficient solution for small and medium enterprises.
Downloads
References
A. O. Afolabi and M. L. Attanda, “Development and Performance Evaluation of Irish Potato Peeling Machine,” J. Eng. Res. Reports, vol. 18, no. 3, pp. 11–23, 2020, doi: 10.9734/jerr/2020/v18i317209.
A. Try, A. Putra, and D. Leni, “Perancangan Mesin Pengupas Kulit Kentang Kapasitas 5 Kg (Design of a Potato Skin Peeling Machine with a Capacity of 5 Kg),” pp. 0–7.
E. J. Kosgollegedara, D. A. N. Dharmasena, and D. N. Jayatissa, “Design, Development and Performance Evaluation of an Abrasion Peeling Machine for Ambarella,” Vavuniya J. Sci., vol. 1, no. 1, pp. 1–9, 2022, doi: 10.4038/vjs.v1i1.1.
I. M. Sari and P. Ansiska, Meningkatkan Daya Saing dan Keberlanjutan Produk Hortikultura Melalui Pengelolaan Pascapanen, pp. 1–124, 2024.
M. Tayyab, A. Hussain, A. Asif, W. Adil, and S. Nabi, “A Computational Study of MoS₂ for Band Gap Engineering by Substitutional Doping of TMN (T = Transition Metal (Cu), M = Metalloid (B) and N = Non-metal (C)),” vol. 6, no. C, pp. 341–348, 2024.
S. A. Goni and M. M. Ilham, “Rancang Bangun Pemindah Daya Mesin Pengupas dan Penghalus Kulit Kacang Tanah Kapasitas 5 Kg/Jam,” Agustus, vol. 7, pp. 2549–7952, 2023.
Sularso and K. Suga, Dasar Perancangan dan Pemilihan Elemen Mesin, Pap. Knowl. Towar. a Media Hist. Doc., p. 200, 2008.
Sumarji, “Effect of Lighting and Sucrose Concentration on the Growth and Production of Potato Micro Tubers (Solanum tuberosum L.),” Multidisiplin Madani, vol. 2, no. 6, pp. 1–14, 2022.
Suwarto and Sudirman, “Perancangan dan Pembuatan Mesin Tepat Guna (Mesin Pencuci dan Pengupas Kulit Kentang) Bertenaga Motor Listrik,” MeKanik, vol. 16, no. 2, pp. 1–7, 2023.
W. Bunganaen, Y. Toai, and D. P. Mangesa, “Rancang Bangun Mesin Pemipil Jagung dengan Metode VDI 2222,” LONTAR J. Tek. Mesin Undana, vol. 9, no. 2, pp. 53–59, 2022, doi: 10.35508/ljtmu.v9i02.9322.
W. K. Sugandi, T. Herwanto, and A. P. Yudi, “Rancang Bangun Mesin Pembersih dan Pengupas Kentang,” Agrikultura, vol. 29, no. 2, p. 111, 2018, doi: 10.24198/agrikultura.v29i2.20850.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Gerry Yohanes, Farras Faiz, Herwandi Herwandi, Idiar Idiar
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
