EVALUASI PEMELIHARAAN MESIN BUBUT DI WORKSHOP PT BAHARI MAKMUR SEJAHTERA UNTUK STANDARDISASI AUTONOMOUS MAINTENANCE
Keywords:
Autonomous Maintenance, lathe machine, routine maintenance, operator, TPMAbstract
Consistent basic maintenance is required to maintain lathe condition. This study evaluates the actual routine maintenance condition of a lathe at the Workshop of PT Bahari Makmur Sejahtera based on Autonomous Maintenance standards. A descriptive approach was used through observation, interviews, documentation, initial cleaning, identification of abnormalities and contamination sources, and analysis of standardization needs. Observations revealed accumulated chips, dust, and lubricant residue, the absence of maintenance standards, a non-functioning automatic feed handle, and an improperly aligned machine table. These findings formed the basis for recommendations covering maintenance areas, methods, frequencies, criteria, corrective actions, and responsibilities. The evaluation identified a gap between the actual condition and the characteristics of structured Autonomous Maintenance. Follow-up recommendations include standardization of cleaning, lubrication, inspection, checklists, and abnormality identification as a basis for autonomous lathe maintenance.
Downloads
References
Bidari, A. P., & Suseno. (2025). Evaluasi pengaruh Autonomous Maintenance terhadap kinerja mesin bubut dalam penerapan Total Productive Maintenance di PT XYZ. Jurnal Teknik Mesin, Industri, Elektro dan Informatika, 4(1), 117–125. https://doi.org/10.55606/jtmei.v4i1.4786
Bilgin Sarı, E. (2021). Fuzzy based failure mode and effect analysis towards to risks of Autonomous Maintenance activities: As a TPM implementation. Ege Academic Review, 21(1), 17–27. https://doi.org/10.21121/eab.873999
Haider, M. M. N., & Rafiquzzaman, M. (2023). Implementation of Total Productive Maintenance in a jute bag industry: A case study. Journal of Engineering Science, 14(1), 137–149. https://doi.org/10.3329/jes.v14i1.67642
Husen, M. R., Iskandar, N., & Sulardjaka. (2023). Analisis penerapan Total Productive Maintenance pada mesin CNC laser cutting fiber dengan metode OEE dan FMEA di CV. XYZ. Jurnal Teknik Mesin, 11(2), 77–82. https://ejournal3.undip.ac.id/index.php/jtm/article/view/38535
Irsan, I., Taba, M. I., & Hakim, H. (2022). Pengaruh sistem pemeliharan Total Productive Maintenance (TPM) dan Lean Manufacturing (LM) terhadap Overall Equipment Effectiveness (OEE) (Studi kasus di PT. Semen Tonasa). SEIKO: Journal of Management & Business, 5(1). https://doi.org/10.37531/sejaman.v5i1.2063
Mauluddin, Y., Rahmawati, D., & Oktavianti, D. (2022). Perencanaan pemeliharaan mesin produksi dengan menggunakan Total Productive Maintenance untuk menjamin kestabilan proses produksi. Jurnal Kalibrasi, 20(2). https://doi.org/10.33364/kalibrasi/v.20-2.1148
Porras Guzmán, C. A. (2024). Improving productivity in electrowelded pipe production lines through the development of a maintenance plan based on Autonomous Maintenance. Industrial Data, 27(2), 173–192. https://doi.org/10.15381/idata.v27i2.25561
Pratitis, A. C. W., & Maryanty, Y. (2024). Evaluasi TPM (Total Productive Maintenance) dan penerapan AM (Autonomous Maintenance) pada produksi susu kental manis di pabrik dairy. DISTILAT: Jurnal Teknologi Separasi, 10(1), 245–255. https://doi.org/10.33795/distilat.v10i1.4908
Rohman, M. F., & Irwan, H. (2025). Strategi Total Productive Maintenance untuk meningkatkan OEE di industri: Systematic literatur review. J@ti Undip: Jurnal Teknik Industri, 20(3), 209–219. https://doi.org/10.14710/jati.20.3.209-219
Yang, Y., & Yang, B. (2024). Employee participation in total productive maintenance – A bottom-up perspective. International Journal of Quality & Reliability Management, 41(1), 269–290. https://doi.org/10.1108/IJQRM-12-2022-0353
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Dini Marlika Aprilia, Indra Feriadi, Rodika Rodika
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
